Bistable relay MTR17-BA-U240-116 equipped with universal power supply can be connected to any AC/DC voltage source in range of 12…240V. Performs bistable BA function. Designed to use in industrial automation systems.
Bistable function available in the MTR17-BA-U240-116 relay:
Bistable ON/OFF – when the supply voltage is applied, the relay starts with OFF position. Every rising edge (OFF->ON) on S contact changes the relay state to the opposite position. |
Connections |
Front Panel |
Version | MTR17-BA-U240-116 |
---|---|
Output Circuit |
|
Contact arrangement | 1NO/NC |
Rated switching current In | AC1 – 16A/250V AC DC1 – 16A/24V DC |
Maximum continuous current | 12A |
Switching load range AC1 | 4 000VA |
Rated/maximum contact voltage | 250/400V AC |
Contact resistance | ≤ 100mΩ |
Maximum switching frequency |
600 cycles/h |
Input Circuit |
|
Supply voltage Un | 12…240V AC/DC |
Supply voltage range |
0,8…1,1Un (9,6…264V) |
Rated consumption | AC: ≤ 2,5VA DC: ≤ 2W |
Rated frequency | 47…63Hz |
Minimum trigger level S-A2 (sensitivity) | 0,7Un |
Minimum control S pulse length | AC: ≥ 90ms DC: ≥ 45ms |
S loadable | yes |
Rated surge voltage | 1 000V |
Insulation |
|
Insulation rated voltage | 250V AC |
Rated surge voltage | 4 000V (1,2/50μs) |
Overvoltage category | III |
Pollution degree |
2 |
Flammability | PCB: V0, housing: HB |
Dielectric strength input-output | 4 000V AC |
Dielectric strength open contact | 1 000V AC |
Dielectric strength between contacts | – |
General Data |
|
Electrical life AC1 at 50% In | ≥ 150 000 |
Mechanical life | ≥ 30 000 000 |
Dimensions (L x W x H) | 90 x 17,5 x 66mm |
Weight | 53g |
Ambient temperature | -20°C …. +55°C |
Relative humidity | 85% |
IP rating | IP20 |
Shock resistance | 15g |
Vibration resistance | 0,35mm (10…55Hz) |
Terminals | max 2,5 mm² |
Installation | DIN rail 35mm |
Time Module |
|
Functions |
BA |
Recovery time | ≤ 100ms |
Order in e-shop |
Order on allegro |
Order by e-mail |
Join as. Dobry Czas sp. z o.o. invites to cooperation sales partners. Submit your proposal marketing@dobry-czas.pl
It is used to secure loads (eg. motors) from the voltage unbalance, incorrect phase sequence or damage to the executive contactor’s contacts.
read moreWelcome to our online store. The full portfolio of products. The certainty of the transaction.
read more